Fujitsu PRIMEQUEST 2000 Series Manual page 48

Settings on the Fibre Channel Card (8Gbps FC Card)
2.2.5 Link Speed and Topology Settings
The following describes how to make the Speed and Topology settings.
■Topology setting
1. Select [Configure Advance Adapter Parameters] form the Main menu, and then press the [Enter] key.
FIGURE 2.59 Topology Selection setting(1)
2. Select [Topology Selection], and then press the [Enter] key.
FIGURE 2.60 Topology Selection setting(2)
Select the connection method, and then press the [Enter] key. Change the setting from the default setting of [AUTO Loop
3.
First -default] as follows.
Fabric connection: Point to Point.
FCAL connection: FCAL
C122-E206-04EN
48