Fujitsu PRIMEQUEST 2000 Series Manual page 59

Settings on the Fibre Channel Card (16Gbps FC Card)

Different 16Gbps FC Card firmware versions cannot be mixed in a single partition. Moreover, different UEFI driver
versions cannot be mixed in a single partition. If you have different versions of the 16Gbps FC Card firmware or UEFI
driver, install the same version of the firmware driver, respectively.
3.1.1 Selecting the Method of Making Settings for the 16Gbps FC Card
Check the UEFI driver version from the [Device Manager] screen of the Boot Manager Front Page.
1. Select [Force boot into EFI Boot Manager] from [Boot Selector] in the [Power Control] window of the MMB. Then, turn
on the power. Start the UEFI Shell.
2. The Boot Manager Front Page appears. Select [Device Manager], and then press the [Enter] key.
C122-E206-04EN
FIGURE 3.1 Boot Manager front page (screen display example)
59