Fujitsu PRIMEQUEST 2000 Series Manual page 50
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (8Gbps FC Card)
2.
Select [Link Speed Selection] in the following screen, and then press [Enter] key.
FIGURE 2.63 Link Speed Selection Setting screen(1)
3.
Select the link speed corresponding to the connection environment (connected FC switch or SAN storage unit), and then
press the [Enter] key.
FIGURE 2.64 Link Speed Selection Setting screen(2)
C122-E206-04EN
50
Advertisement
Table of Contents
