Settings on the Fibre Channel Card (8Gbps FC Card)
13. Select [Delete Boot Device] from the [Emulex Adapter Configuration Main Menu] screen, and then press the [Enter]
key. (Here, confirm only the registration status of the boot device that was set with [Commit Changes].)
FIGURE 2.35 Boot device setting (11)
14. Confirm the registration of the boot device that was set with [Commit Changes].
In the following example, LUN 0007 is confirmed connected with the target WWN: 207100B 5D6A0510.
FIGURE 2.36 Boot device setting (12)
C122-E206-04EN
33