Fujitsu PRIMEQUEST 2000 Series Manual page 68
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (16Gbps FC Card)
1. Select [Configure HBA and Boot Parameters], and then press the [Enter] key.
2. Select [Topology Selection <AUTO Loop First –default>], and then press the [Enter] key.
C122-E206-04EN
FIGURE 3.11 Static Topology setting (1)
FIGURE 3.12 Static Topology setting (2)
68
Advertisement
Table of Contents
