Settings on the Fibre Channel Card (8Gbps FC Card)
2.2.2 Setting of the OpROM Scan Configuration
Installed HBA is read with Legacy BIOS. then, the [OpROM Scan Configuration] setting of the PCI slot.
1.
Select [Device Manager], and then press the [Enter] key.
2.
Select [PCI Subsystem Configuration], and then press the [Enter] key.
3.
Select [OpROM Scan Configuration], and then press the [Enter] key.
FIGURE 2.50 PCI Subsystem Configuration
4.
The slot number equipped with HBA is changed from [Disabled] to [Enabled].
FIGURE 2.51 OpROM Scan Configuration (1)
C122-E206-04EN
43