Fujitsu PRIMEQUEST 2000 Series Manual page 102

Consideration of Linux Installation
CHAPTER 5
Installation
This chapter describes how to install Red Hat Enterprise Linux on the PRIMEQUEST 2000 series server.
5.1 Linux Server OS Install
Refer to OS installation manual for the installation of Linux OS.
5.1.1 Preparing for Linux installation
Make settings for installation in advance.
For details on this advance setup, see 4.4.1 Advance setup in the PRIMEQUEST 2000 Series Installation Manual
(C92344-0536).
For a multipath configuration, disconnect the secondary cable connected to the server.
Specifically, use a single path configuration (connection with only one FC cable) until you complete the installation of the
operating
system and multipath driver.
If the server is in a multipath connection state, the operating system cannot be installed correctly. Manually disconnect the
secondary FC
path beforehand (more specifically, disconnect the secondary cable of each server).
C122-E206-04EN
Consideration of Linux
102