Fujitsu PRIMEQUEST 2000 Series Manual page 29

Settings on the Fibre Channel Card (8Gbps FC Card)
4. Fibre Device information appears when the search process has been successful.
FIGURE 2.27 Boot device setting (3)
Remarks
If the expected Fibre Device is not displayed, there is a possibility that the setting of the SAN storage or the setting or
physical connection of the FC switch is incorrect.
Confirm these settings once again.
5. Select [Go to Configuration Main Menu], and then press the [Enter] key.
FIGURE 2.28 Boot device setting (4)
C122-E206-04EN
29