Settings on the Fibre Channel Card (16Gbps FC Card)
13. Select [Back to Display Adapters and RECONNECT DEVICES], and then press the [Enter] key to return to the higher
menu.
Important) Do not select [Back to Display Adapters and RECONNECT DEVICES] to return to the higher menu,
If select, your system will hung up. If your system hung up and is not operated for three minutes and over,
reset the system and restart setting procedures.
C122-E206-04EN
FIGURE 3.31 Boot device setting (12)
FIGURE 3.32 Boot device setting (13)
79