Avaya S8500 Installing And Configuring page 22

Chapter 1: Introduction
.Table 3 lists the possible uses of the PE interface for an S8500 primary controller.
Table 3: Use of the PE interface for a simplex S8500 primary controller
Possible functions of
the PE interface
Registration
H.248 gateway
registration
H.323 endpoint
registration
Adjunct connectivity
22
Installing and Configuring the Avaya S8500 Media Server
Status of the function
on the server
The PE interface is
enabled for registration
on a simplex main server.
H.248 gateway
registration is allowed on
the S8500 main server
using the PE interface.
H.323 registration is
allowed on the S8500
main server using the PE
interface.
Adjunct connectivity is
allowed on the S8500
main server using the PE
interface.
Administration needed
No. The use of the PE interface for
registration is enabled
automatically by the
Communication Manager
software.
Yes. Administration to allow H.248
registration on the PE interface of
the S8500 main server is
performed on the ip-interfaces
procr form.
Yes. Administration to allow H.323
registration of the PE interface of
the S8500 main server is
performed on the ip-interfaces
procr form.
Yes. Adjuncts must be
administered using the ip-services
or the communication-interface
processor-channels form prior to
the survivable-processor form.
February 2006