4. Select Set Identities and click Continue.
5. Assign Ethernet port functions using the drop-down menus for the following fields:
Control Network A: [default: Ethernet 0]
●
Services Port: [default: Ethernet 1]
●
Corporate LAN: [default: Ethernet 0]. Set this field to Ethernet 2 to have the IPSI
●
control on a dedicated, separate Ethernet port.
Unused
●
6. Click Continue.
7. Fill in the following information for Ethernet 2:
IP address
●
Gateway
●
Subnet mask
●
Speed
●
8. Verify with the customer's network administrator that the LAN hardware supports 802.1q
priority tagging. If supported, select VLAN 802.1q priority tagging.
9. Click Change. The status of the configuration update appears in the window.
When the update completes, the following message appears:
Successfully configured ethernet interfaces.
54
Installing and Configuring the Avaya S8500 Media Server
February 2006