Testing Connectivity To Customer's Network - Avaya S8500 Installing And Configuring

Testing connectivity to customer's network

To test the connectivity to the customer's network:
1. Under Diagnostics click Ping.
2. Select Host Name or IP address and type in the IP address of a computer on the
network.
3. Click Execute Ping.
4. Verify that the ping was successful, indicating that the media server is connected to the
customer's network.
5. If DNS is administered, type in the host name of a computer on the network.
6. Click Execute Ping.
7. Verify that the ping was successful, indicating that DNS is working.
If available, have a customer representative do the following test from a computer on their
network:
8. Click Start > Run to open the Run dialog box.
9. Type command and click OK to open an MS-DOS command window.
10. Type ping serveripaddress and click OK, where serveripaddress is the IP
address of media server.
Installing and Configuring the Avaya S8500 Media Server
Configuring the dual network interface card
55
February 2006