Chapter 5: IP interface translations
To administer IPSI circuit packs, use a terminal emulation program to issue Communication
Manager SAT commands.
For Communication Manager terminal emulation, use a program such as Avaya Native
Configuration Manager, Avaya Terminal Emulation, or HyperTerminal.
You also can use Avaya Site Administration to issue SAT commands. To administer some of the
features in the latest release of Avaya Communication Manager, you must use the latest
version of Avaya Site Administration.
Perform these tasks to administer IPSI circuit packs:
Starting SAT terminal emulation
●
Inputting initial system translations
●
Adding media gateways
●
Enabling the IPSI
●
Adding the IPSI to the system
●
Setting the alarm activation level
●
Saving translations
●
Starting SAT terminal emulation
1. On your Services laptop computer, open a VT-100 terminal emulation session.
2. If you use a serial modem connection, administer the following terminal emulation port
settings:
9600 baud
●
No parity
●
8 data bits
●
1 stop bit
●
No flow control
●
5023 for the port
●
3. Log into the media server as craft.
Installing and Configuring the Avaya S8500 Media Server
on page 59
on page 60
on page 60
on page 61
on page 62
on page 62
on page 62
59
June 2006