Avaya S8500 Installing And Configuring page 91

Figure 9: Front view of the Avaya S8500 Media Server
h2ms85bf KLC 091704
Figure notes:
1: CD-ROM drive activity LED.
2: CD eject button.
3: Diskette drive activity LED.
4: Diskette eject button.
5: System error LED.
6: System locator LED
7: Hard disk drive activity LED
8: Power on LED
9: Power control button
10: Reset button
11: USB connections for the
Compact Flash drive
Installing and Configuring the Avaya S8500 Media Server
1 2
When lit, the CD-ROM drive is in use.
Press to release a CD from the CD-ROM drive.
When lit, the diskette drive is in use.
Press to release a diskette from the diskette drive.
When lit, a system error has occurred.
Use this blue LED to visually locate the media server if it is in
a location with numerous other media servers.
When flashing, a hard disk drive is in use.
When lit and not flashing, the media server is turned on.
When flashing, the media server is turned off and still
connected to the an ac power source
When off, ac power is not present, or the power supply or the
LED itself has failed.
Press to turn the media server on and off manually.
Press to reset the media server and run the power-on
self-test (POST). You might have to use a pen or the end of a
straightened paper clip to press the button.
3 5 6
4
11 10
February 2006
S8500 LEDs
7
8
9
91