Avaya S8500 Installing And Configuring page 69

8. To set the control interface, type set control interface ipaddr netmask and
press Enter, where ipaddr is the customer-provided IP address and netmask is the
customer provided subnet mask.
9. Enter quit to save the changes and exit the IPSI session.
10. Telnet to 192.11.13.6 and login.
11. Enter show control interface.
The IP address, subnet mask, and default gateway information is displayed.
Verify that the proper information was entered.
12. If a default gateway is used, enter the gateway IP address with
set control gateway gatewayaddr, where gatewayaddr is the customer-provided
IP address for their gateway.
13. Enter quit to save the changes and exit the IPSI session.
14. Telnet to 192.11.13.6 and login.
15. Use show control interface to verify the administration.
16. Type exit and press Enter to see the changes.
Installing and Configuring the Avaya S8500 Media Server
IPSI address configuration
February 2006
69