Chapter 5: IP interface translations
Inputting initial system translations
If system translations were prepared offsite, input the translations and reset the media server. If
the translations are not available, enter minimal translations to verify connectivity to the port
networks.
1. Type save translation and press Enter to save the translations to the hard drive.
2. Type reset system 4 and press Enter to have the software read the copied
translations.
Adding media gateways
Note:
If system translations have been loaded on the media server, media gateways do
Note:
not need to be added in order to administer the IPSI.
1. Type add cabinet n (where n is the cabinet number) and press Enter for each stack of
Media Gateways controlled by one TN2312BP IPSI circuit pack.
A cabinet is defined as up to five G650 Media Gateways mounted in a rack and
TDM-connected.
2. Fill in the location and carrier type for media gateways 2(B), 3(C), 4(D), and 5(E).
add cabinet 1
CABINET DESCRIPTION
Cabinet Layout: G650-rack-mount-stack
Number of Portnetworks: 1
Survivable Remote EPN? n
Cabinet Holdover: A-carrier-only
CARRIER DESCRIPTION
Carrier
E
D
C
B
A
58
Installing and Configuring the Avaya S8500 Media Server
Cabinet: 1
Cabinet Type: expansion-portnetwork
Location: 1
Room:
Carrier Type
not-used
not-used
not-used
G650-port
G650-port
CABINET
IP Network Region:1
Floor:
Number
PN
09
PN
09
PN
09
PN
09
PN
09
Page
1 of
1
Building:
February 2006