Verify Connectivity To The Network Server - Avaya S8500 Manual

Verify connectivity to the network server

To verify that the Ethernet port is working, ping from the media server the network server where the
backup files are stored.
NOTE:
You may need to restart your browser before doing the next steps.
1
Move the Ethernet cable connected to the customer's network from the busied-out standby S8700
Media Server to the S8710 Media Server (IP: Eth0; MC: Eth4). See
on the back of the S8710 Media Server,
Figure 24: Port connections on the back of the S8710 Media Server
3
2
1
Figure notes
1 Ethernet 2
2 Ethernet 3
3 Ethernet 4
2
Under Diagnostics, click Ping.
3
Select Host Name or IP Address and type the IP address of the server where the system files are
stored
4
Click Execute Ping.
If you can successfully ping the server, then you can restore the backed up Security Files and
Linux migration files.
Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Migrating from an S8700 Media Server to an S8710 Media Server
3
100 MGz
2
100 MGz
1
133 MGz
VDCI
2 3 4
5
on page 155.
iLO
2 1
UID
2 1
6
4 Not used
5 Ethernet 1
6 Ethernet 0
On first S8710 Media Server
Figure 24, Port connections
cads87ni KLC 043004
155
3