Configuration
Network connectivity
Introduction
This section describes how the 1006r server can be integrated into your network. The
integration depends on the type of switch you are using.
Important:
To secure the Avaya CallPilot server from unauthorized access, ensure that the CallPilot
network is inside your organization's firewall.
Sample network setup: Meridian 1
The following diagram shows a CallPilot server sample network setup with a Meridian 1 switch.
The Meridian 1 switch can be one of the following:
• Option 11C or Option 11C Mini
• Option 51C
• Option 61C
• Options 81 and 81C
Avaya CallPilot® 1006r Server Hardware Installation
Card slot
Slot
type
number
Note:
3 MGate cards connect to 1 MPB96
When cabling to MGate cards, the RJ-45 connectors are numbered
from 1 to 3 on the top NTRH40CAE5 MPB96 board and from 4 to 6 on
the middle NTRH40CAE5 MPB96 board starting from the right side of
the back panel (next to the power supplies)
Position
Card type Meridian 1*/ CS*
Network connectivity
1000
December 2010
17