Testing Connectivity To Customer's Network - Avaya S8500 Installing And Configuring

Testing connectivity to customer's network

1. On the Maintenance Web Interface under Diagnostics, click Ping.
2. Select Host Name or IP address and type the IP address of a computer on the network.
3. Click Execute Ping.
4. Verify that the ping was successful. This indicates that the media server is connected to
the customer network.
5. If DNS is administered, type in the host name of a computer on the network.
6. Click Execute Ping.
7. Verify that the ping was successful. This indicates that DNS is working.
If available, have a customer representative perform the following test from a computer on their
network:
1. Click Start > Run to open the Run dialog box.
2. Type command and click OK to open an MS-DOS command window.
3. Type ping serveripaddress and press Enter, where serveripaddress is the IP
address of media server.
4. Verify that the ping was successful.
Installing and Configuring the Avaya S8500 Media Server
Configuring the dual network interface card
57
June 2006