Draytek Vigor2620 LTE Series User Manual page 91

DNS Server IP Address
After finishing all the settings here, please click OK to activate them.
Vigor2620 Series User's Guide
than the current one you are using.
Obtain an IP address automatically – Click this button to
obtain the IP address automatically if you want to use
Dynamic IP mode.

Router Name: Enter the router name provided by ISP.

Domain Name: Enter the domain name that you have
assigned.
Specify an IP address – Click this radio button to specify
some data if you want to use Static IP mode.

IP Address: Enter the IP address.

Subnet Mask: Enter the subnet mask.

Gateway IP Address: Enter the gateway IP address.
Default MAC Address: Click this radio button to use default
MAC address for the router.
Specify a MAC Address: Some Cable service providers
specify a specific MAC address for access authentication. In
such cases you need to click the Specify a MAC Address and
enter the MAC address in the MAC Address field.
Enter the primary IP address for the router if you want to use
Static IP mode. If necessary, Enter secondary IP address for
necessity in the future.
79