Draytek Vigor2620 LTE Series User Manual page 478

del<IP1> /all
E x a m p l
E x a m p
> ip6 session on
> ip6 session add 2100:ABCD::2-2100:ABCD::10 100
> ip6 session status
IPv6 range:
2100:ABCD::2 - 2100:ABCD::10 : 100
Current ip6 session limit is turn on
Current default session number is 100
T e l n e t C o m m
T e l n e t C o m m
This command allows you to set IPv6 settings
S y n t a x
S y n t a x
ip6 bandwidth on
ip6 bandwidth off
ip6 bandwidth default <tx_rate> <rx_rate>
ip6 bandwidth status
ip6 bandwidth show
ip6 bandwidth add <IP1-IP2> <tx><rx><shared>
ip6 bandwidth del <IP1> /all
S y n t a x
S y n t a x
Parameter
on
off
default <tx_rate>
<rx_rate>
status
show
add <IP1-IP2>
<tx><rx><shared>
del <IP1> /all
466
range.
<IP1-IP2> : Specify a range for IPv6 addresses.
<num>: Enter a number.
<del>
<IP1> : Specify the first IPv6 address within the IPv6 range.
all: Delete all the session limits.
e
l e
a n d : i p 6 b a n d w i d
a n d : i p 6 b a n d w i d
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to turn on bandwidth limit for each IP.
It means to turn off bandwidth limit for each IP.
It means to set the default transmission (tx), receiving (rx)
rate of bandwidth limit (0-30000 Kbps/Mbps).
<tx_rate>: Enter a number.
<rx_rate>: Enter a number.
It means to display the current settings.
It means to display all IP range bandwidth limit settings.
<add>: It means to add the bandwidth limit for an IPv6
range.
<del>: It means to delete the bandwidth limit for an IPv6
range by first IP (IP1) or 'del all'.
<IP1-IP2> - Specify a range for IPv6 addresses.
<tx><rx>: It means the bandwidth limit for transmission and
receivign rate.
<shared>: I
range.
It means to delete the bandwidth limit for an IPv6 range by
first IP (IP1) or 'del all'.
It means to delete the session limit for an IPv6 range.
:
t h
t h
t means the bandwidth will be shared for the IPv6
Vigor2620 Series User's Guide