Draytek Vigor2620 LTE Series User Manual page 84

DNS Server IP Address
WAN Connection
Detection
72
ISP.

Domain Name – Type in the domain name that you have
assigned.

DHCP Client Identifier* - Check the box to specify
username and password as the DHCP client identifier
for some ISP.

Username: Type a name as username. The
maximum length of the user name you can set is 63
characters.

Password: Type a password. The maximum length of
the password you can set is 62 characters.
Specify an IP address – Click this radio button to specify
some data.

IP Address – Type in the private IP address.

Subnet Mask – Type in the subnet mask.

Gateway IP Address – Type in gateway IP address.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
than the current one you are using. Notice that this setting is
available for WAN1 only. Type the additional WAN IP address
and check the Enable box. Then click OK to exit the dialog.
Type in the primary IP address for the router. If necessary,
type in secondary IP address for necessity in the future.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect, Ping Detect or Always On for
the system to execute for WAN detection. If you choose Ping
Detect as the detection mode, you have to type required
settings for the following items.

Primary/Secondary Ping IP – If you choose Ping Detect as
Vigor2620 Series User's Guide