Draytek Vigor2620 LTE Series User Manual page 548

T e l n e t C o m m
T e l n e t C o m m
This command is used to configure daylight save setting.
S S y y n n t t a a x x
sys daylightsave [-<command> <parameter> | ... ]
S y n t a x
S y n t a x
Parameter
<command><parameter>/
...
-v
-r
-e <enable>
-t <type>
-s <year> <month> <day>
<hour>
-d <year> <month> <day>
<hour>
-y <month> <th weekday>
<day in week> <hour>
-z <month> <th weekday>
<day in week> <hour>
E x a m p l
E x a m p
> sys daylightsave -y 9 1 0 14
% Start: Yearly on Sep 1th Sun 14:00
536
a n d : s y s d a y l i g h t s
a n d : s y s d a y l i g h t
D e s c r i p t i o n
D e s c r i p t i o n
Description
The available commands with parameters are listed below.
[...] means that you can Enter several commands in one line.
Display the daylight saving settings.
Set to factory default setting.
<enable>: Enter 1 or 0.
Enable (1) / disable (0) daylight saving.
Specify the saving type for daylight setting.
<type>: Enter 0, 1 or 2.
0 – Default
1 – Time range
2 - Yearly
Set the detailed settings of the starting day for time range
type.
<year>: Enter the year.
<month>: Enter 1 ~ 12.
<day>: Enter 1 ~ 31.
<hour>: Enter 0 ~ 23.
e.g., sys daylightsave -s 2014 3 10 12
Set the detailed settings of the ending day for time range
type.
<year>: Enter the year.
<month>: Enter 1 ~ 12.
<day>: Enter 1 ~ 31.
<hour>: Enter 0 ~ 23.
e.g., sys daylightsave -d 2014 9 10 12
Set the detailed settings of the starting day for yearly type.
<month>: Enter 1 ~ 12.
<th weekday>: Enter 1 ~ 5, 9: last week
<day in week>: Enter 0 ~6. 0:Sun, 1:Mon, 2:Tue, 3:Wed,
4:Thu, 5: Fri, 6:Sat
<hour>: Enter 0 ~ 23.
e.g, sys daylightsave -y 9 1 0 14
Set the detailed settings of the ending day for yearly type.
<month>: Enter 1 ~ 12.
<th weekday>: Enter 1 ~ 5, 9: last week
<day in week>: Enter 0 ~6. 0:Sun, 1:Mon, 2:Tue, 3:Wed,
4:Thu, 5: Fri, 6:Sat
<hour>: Enter 0 ~ 23.
e.g, sys daylightsave -z 3 1 6 14
e
l e
a v e
s a v e
Vigor2620 Series User's Guide