Draytek Vigor2620 LTE Series User Manual page 107

MPoA
After finished the above settings, click OK to save the settings and return to previous page.
A A d d v v a a n n c c e e
Such configuration is applied to upstream packets. Such information will be provided by ISP.
Please contact with your ISP for detailed information.
Vigor2620 Series User's Guide
Always On – If selected, the router will maintain the
PPPoE/PPPoA connection.
Idle Timeout – Maximum length of time, in seconds, of idling
allowed (no traffic) before the connection is dropped.
IP Address From ISP - Specifies how the WAN IP address of
the channel configured.

Obtain an IP address automatically – Select this option if the
router is to receive IP configuration information from a DHCP
server.


Specify an IP address – Select this option to manually enter
the IP address.



DNS Server IP Address - Type in the primary IP address for
the router if you want to use Static IP mode. If necessary,
type in secondary IP address for necessity in the future.
d d
use.
Fixed IP
Yes - IP address entered in the Fixed IP Address field
will be used as the IP address of the virtual WAN.
No - Virtual WAN IP address will be assigned by the ISP's
PPPoE/PPPoA server.
Router Name – Sets the value of DHCP Option 12, which
is used by some ISPs.
Domain Name – Sets the value of DHCP Option 15,
which is used by some ISPs.
IP Address – Type in the IP address.
Subnet Mask – Type in the subnet mask.
Gateway IP Address – Type in gateway IP address.
95