Draytek Vigor2620 LTE Series User Manual page 465

S y n t a x
S y n t a x
Parameter
server
<<command>
<parameter>/...>
-a
-b
-n <name>
-c <parameter>
-e <parameter>
-t <time>
-y <time>
-u <time>
-o <time>
-i <pool_min_addr>
-x <pool_max_addr>
-R
-r <1/0>
-N <1/0>
-d <addr>
-D <addr>
-m <1/0>
-q <name>
-z<1/0>
pdadd
Vigor2620 Series User's Guide
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means the dhcp server settings.
The available commands with parameters are listed below.
<...> means that you can Enter several commands in one line.
It means to show current DHCPv6 status.
It means to show current DHCPv6 IP Assignment Table.
It means to set a profile name.
<name>: Enter a string as profile name.
It means to send rapid commit to server.
<parameter>: Enter 1 or 0.
1: Enable
0: Disable
It means to enable or disable the DHCPv6 server.
<parameter>: Enter 1 or 0.
1: Enable
0: Disable
It means to set prefer lifetime.
<time>: Enter a value.
It means to set valid lifetime.
<time>: Enter a value.
It means to set T1 time.
<time>: Enter a value.
It means to set T2 time.
<time>: Enter a value.
It means to set the start IPv6 address of the address pool.
<pool_min_addr>: Enter an IPv6 address.
It means to set the end IPv6 address of the address pool.
<pool_max_addr>: Enter an IPv6 address.
It means to send reconfigure packet to a client.
It means to enable (1) or disable (0) auto_range.
It means to enable (1) or disable (0) random address
allocation.
It means to set the first DNS IPv6 address.
<addr> : Enter an IPv6 address.
It means to set the second DNS IPv6 address.
<addr> : Enter an IPv6 address.
It means to enable(1) or disable (0) the server DUID set by
Link Layter and Time.
It means to set DNS domain search list.
<name>: Enter a name.
It means enable (1) or disable (0) the DHCP PD.
It means to add PD node.
453