Draytek Vigor2500V Quick Installation Manual
Draytek Vigor2500V Quick Installation Manual

Draytek Vigor2500V Quick Installation Manual

Hide thumbs Also See for Vigor2500V:

Advertisement

Quick Links

Vigor2500V/Vi Quick Installation Guide
Copyright Information
Copyright
Copyright 2004 All rights reserved. This publication contains
Declarations
information that is protected by copyright. No part may be
reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language without written
permission from the copyright holders.
Trademarks
The following trademarks are used in this document:
1. Microsoft is a registered trademark of Microsoft Corp.
2. Windows, Windows95/98/Me/NT/2000/XP and Explorer are
3. Apple and Mac OS are registered trademarks of Apple
Other products may be trademarks or registered trademarks
of their respective manufacturers.
Safety Instructions and Approval
Safety
1. Read the installation guide thoroughly before you set up the
Instructions
2. The router is a complicated electronic unit that may be
3. Do not place the router in a damp or humid place, e.g. a
4. The router should be used in a sheltered area, within a
5. Do not expose the router to direct sunlight or other heat
6. Keep the package out of reach of children.
7. When you want to dispose of the router, please follow local
Warranty
We warrant to the original end user (purchaser) that the router
will be free from any defects in workmanship or materials for a
period of three (3) years from the date of purchase from the
dealer. Please keep your purchase receipt in a safe place as it
serves as proof of date of purchase. During the warranty
period, and upon proof of purchase, should the product have
indications of failure due to faulty workmanship and/or
trademarks of Microsoft Corp.
Computer Inc.
router.
repaired only be authorized and qualified personnel. Do not
try to open or repair the router yourself.
bathroom.
temperature range of +5 to +40 Celsius.
sources. The housing and electronic components may be
damaged by direct sunlight or heat sources.
regulations on conservation of the environment.
i

Advertisement

Table of Contents
loading

Summary of Contents for Draytek Vigor2500V

  • Page 1 Vigor2500V/Vi Quick Installation Guide Copyright Information Copyright Copyright 2004 All rights reserved. This publication contains Declarations information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders.
  • Page 2 Firmware & Due to the continuous evolution of DrayTek ADSL & Router Tools Updates technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents.
  • Page 3: Table Of Contents

    1.2 Highlights ................3 1.3 Front Panel LEDs and Rear Panel Interfaces ....... 4 1.4 Package Contents..............6 2. Quick Install Your Vigor2500V/Vi Router ....... 7 2.1 Hardware Installation ............7 2.2 Configure Your Router via Web Configurator ......8 3.
  • Page 4: Introduction

    ISDN loop through ISDN backup The Vigor2500V/Vi router, an Internet access solution for your LAN, which provides you the shared web surfing and countless value-added features, such as Firewall / Security, VoIP, multimedia support. These are all in a reliable one-box solution.
  • Page 5: Highlights

    1.2 Highlights VoIP Flexible URL Content Filtering W G.168 Line Echo-cancellation W URL blocking by user-defined keywords W Gain Control W Preclude web surfing from using directly W Jitter Buffer (250ms) IP address W Java/ActiveX/cookies/proxy blocking W Voice CODEC: G.711 A/u law, G.729 W Executable/compressed/multimedia files A/B, VAD/CNG blocking...
  • Page 6: Front Panel Leds And Rear Panel Interfaces

    1.3 Front Panel LEDs and Rear Panel Interfaces 1.3.1 Vigor2500V Status Explanation ACT (Activity) blinking The router is powered on and running properly. When detecting one or more user-defined e-mails existing on E-mail blinking mail server. ADSL The ADSL line is showtime.
  • Page 7 1.3.2 Vigor2500Vi Status Explanation ACT (Activity) blinking The router is powered on and running properly. The ISDN network is correctly setup. ISDN/E-mail When detecting one or more user-defined e-mails existing on blinking mail server. ADSL The ADSL line is showtime. Solid light when the handset of phone is picked up (off hooked).
  • Page 8: Package Contents

    1.4 Package Contents Quick Installation Guide CD (Manual and Utilities) UK-type power adapter EU-type power adapter USA/Taiwan-type power adapter AU/NZ-type power adapter RJ-45 (Ethernet) RJ-11 to RJ-11 (Annex A / B) RJ-45 to RJ-45 (ISDN) RJ-11 to RJ-45 (Annex B) (for Vigor2500Vi only)
  • Page 9: Quick Install Your Vigor2500V/Vi Router

    2. Quick Install Your Vigor2500V/Vi Router 2.1 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. 1. Connect the ADSL interface to the external splitter with a RJ-11 cable. 2. Connect one port of 4-port switch to your computer with a RJ-45 cable.
  • Page 10: Configure Your Router Via Web Configurator

    2.2 Configure Your Router via Web Configurator 1. Launch the Web browser and link to http://192.168.1.1 , then an authentication dialog box will pop up. 2. If this is a first time setup of the router, type admin as the user name and leave the password field blank.
  • Page 11 A. Using PPPoE / PPPoA with a DSL Modem 1. PPPoE / PPPoA Client Check “Enable” to enable the PPPoE/PPPoA client protocol on the WAN interface. 2. DSL Modem Settings Select active PVC channel by Multi-PVC channel item. And then fill all the other fields in this group with correct parameters according to your ISP’s information.
  • Page 12 B. Using MPoA with a DSL Modem 1. MPoA (RFC1483/2684) Check “Enable” to enable the MPoA protocol on the WAN interface. Then select an appropriate encapsulation which provided by your ISP. 2. DSL Modem Settings Select active PVC channel by Multi-PVC channel item. And then fill all the other fields in this group with correct parameters according to your ISP’s information.
  • Page 13: Voip Settings

    3. VoIP Settings This section explains the capabilities of VoIP on the router. Click VoIP Setup from the main menu to enter the VoIP configuration page. Caution: The Phone port can be connected to an analog phone only. Do not connect the Phone port to the telephone wall jack;...
  • Page 14 Click each index number, and then you can edit each dial settings respectively. Enable: To enable this entry for mapping phone number when you dial the keypad on the phone. Phone Number: Choose any number from 0~9 and * to set as a quick dial number.
  • Page 15: Sip Related Function Setup

    Example 1: If Tom gives you a SIP URL as sip:63065@fwd.pulver.com then you can input the number just as the previous figure, except you can change any number in the Phone Number field. Example 2: If Aaron gives you a sip url as sip:aaron@203.69.175.19 then you can enter the DialPlan as: Phone Number: 1234 (any number you like)
  • Page 16: Calling Scenario

    3.3 Calling Scenario 3.3.1 Peer-to-Peer calling There are two people, say Kevin and Aaron. They both have a Vigor2500V series router in hand, so here are their settings in order to call each other. Kevin’s IP address: 214.61.172.53 Aaron’s IP address: 203.69.175.19...
  • Page 17 3.3.2 Calling via SIP server Here’s the scenario that two people call each other via SIP server; this is a good way to calling when they use dynamic public IP addresses. Again, here’re the settings for each other: Kevin’s SIP url: kevin@iptel.org Irene’s SIP url: irene@fwd.pulver.com A.
  • Page 18: Trouble Shooting

    4. Trouble Shooting This section will guide you how to shoot troubles on abnormal situations. Please follow the order of subsection as below to check your installation. 4.1 Is the Hardware Status OK? 1. Check that if the power line and ADSL/LAN cable are connected correctly. 2.
  • Page 19: Are The Network Connection Settings On Your Pc Ok

    4.2 Are the Network Connection Settings on Your PC OK? The following example is based on Windows XP case, regarding the other OS examples, please refer to the similar steps or support notes in www.draytek.com. 1. Go to Control Panel and then 2. Right-click on Local Area double-click on Network Connection and click on Properties.
  • Page 20: Can You Ping The Router From Pc

    4.3 Can You Ping the Router from PC? The default gateway IP of the router is 192.168.1.1. Please check that if you can ping the router correctly. A. For Windows 1. Open the Command Prompt window (from start menu > Run ) 2.
  • Page 21: Are The Isp Settings Ok

    4.4 Are the ISP Settings OK? Click Internet Access Setup group and then check whether the ISP settings are set correctly. A. For PPPoE/PPPoA Users (refer to the following figure) 1. Check that if the Enable option is selected. 2. Verify if all parameters of DSL Modem Settings are entered with correct value which given by your ISP.
  • Page 22: Report To Isp And Dealer For Further Technical Support

    1. If the router settings are correct at all, and the router still does not connect, please contact your ISP technical support representative to help you for configuration. 2. If the router does not work correctly, please contact your dealer for help. For any further questions, please send e-mail to support@draytek.com...

This manual is also suitable for:

Vigor2500vi

Table of Contents