Draytek Vigor2620 LTE Series User Manual page 415

adsl ppp <?><pvc_no> <vci> <vpi> <Encap> <Proto> <modu> <acqIP> <idle> <Username>
<Password>
S y n t a x
S y n t a x
Parameter
<?>
<pvc_no>
<Encap>
<Proto>
<modu>
<acqIP>
<idle>
<Username>
<Password>
You have to reboot the system when you set it on Route mode.
E x a m p l
E x a m p
> adsl ppp o 35 8 1 1 4 1 -1 draytek draytek
pvc no.=0
vci=35
vpi=8
Vigor2620 Series User's Guide
D e s c r i p t i o n
D e s c r i p t i o n
e
l e
Description
Display the command syntax of "adsl ppp".
It means the PVC number and the adjustable range is from
0 (Channel-1) to 7(Channel-8).
Different numbers represent different modes.
0 : VC_MUX,
1: LLC/SNAP,
2: LLC_Bridge,
3: LLC_Route,
4: VCMUX_Bridge
5: VCMUX_Route,
6: IPoE.
It means the protocol used to connect Internet. Different
numbers represent different protocols.
0: PPPoA,
1: PPPoE,
2: MPoA.
0: T1.413,
2: G.dmt,
4: Multi,
5: ADSL2,
7: ADSL2_AnnexM
8: ADSL2+
14: ADSL2+_AnnexM.
It means the way to acquire IP address. Type the number to
determine the IP address by specifying or assigned
dynamically by DHCP server.
0: fix_ip,
1: dhcp_client/PPPoE/PPPoA.(acquire IP method)
Type number to determine the network connection will be
kept for always or idle after a certain time.
-1: always on, else idle timeout secs. Only for
PPPoE/PPPoA.
This parameter is used only for PPPoE/PPPoA
This parameter is used only for PPPoE/PPPoA
403