Draytek Vigor2620 LTE Series User Manual page 467

-m n
6rd
-C <n>
-s <server>
-m <n>
-p <prefix>
-l <n>
6in4
-s <server>
-I <IPv6 Addr>
-P <n>
-p <prefix>
-l <n>
-T <n>
TSPC/AICCU
-u <username>
-P <password>
-s <server>
AICCU
-p <prefix>
-l <n>
-o <1/0>
-f
Static
-w <addr>
Others
-d <server>
-D <server>
-t <dhcp/ra/none>
-V
-k
-j
-r n
-c n
-q <0/1/2>
Vigor2620 Series User's Guide
n=3: AICCU,
n=4: DHCPv6,
n=5: Static
n=6: 6in4-Static
n=7: 6rd
It means to set IPv6 MTU.
n = any value (0 means "unspecified").
It means to set 6rd connection mode.
n=0: Auto
n=1: Static
It means to set 6rd IPv4 Border Relay.
<server>: Enter a string.
It means to set 6rd IPv4 address mask length.
<n>: Enter a number.
It means to set IPv6 prefix for 6rd connection.
<prefix>: Enter a prefix number of IPv6 address.
It means to set the prefix length for 6rd connection.
<n>: It means to enter a fixed value as the length of the
prefix.
It means to set 6in4 remote endpoint IPv4 address.
It means to set the IPv6 address for 6in4 connection.
It means to set IPv6 WAN prefix length for 6in4 connection.
It means to set 6in4 LAN Routed Prefix.
It means to set 6in4 LAN Routed Prefix length.
It means to set 6in4 Tunnel TTL.
It means to set username (max. 63 characters).
<username>: Enter a string.
It means to set Password (max. 63 characters).
<password>: Enter a password.
It means to set Tunnel Server IP.
<server>: Enter an IPv4 Address or URL (max. 63 characters)
It means to set Subnet Prefix (AICCU).
<prefix>: Enter a prefix number of IPv6 address.
It means to set Subnet Prefix length (AICCU).
<n>: Enter a number.
It means to set AICCU always on.
1: on
0: off
It means to set AICCU tunnel ID.
It means to set Default Gateway.
<addr>: Enter an IPv6 address.
It means to set 1st DNS Server IP.
<server>: Enter an IPv6 address.
It means to set 2nd DNS Server IP.
<server>: Enter an IPv6 address.
It means to set ipv6 PPP WAN test mode for DHCP or RA.
<dhcp/ra/none> : Enter dhcp, ra or none.
It means to view IPv6 Internet Access Profile.
It means to dial the Tunnel on the WAN.
It means to drop the Tunnel on the WAN.
It means to set Prefix State Machine RA timeout.
It means to set Prefix State Machine DHCPv6 Client timeout.
It means to set WAN detection mode.
455