Draytek Vigor2620 LTE Series User Manual page 186

Mode
WPA
WEP
174
There are several modes provided for you to choose.
Info You should also set RADIUS Server
simultaneously if 802.1x mode is selected.
Disable - Turn off the encryption mechanism.
WEP - Accepts only WEP clients and the encryption key
should be entered in WEP Key.
WEP/802.1x Only - Accepts only WEP clients and the
encryption key is obtained dynamically from RADIUS server
with 802.1X protocol.
WPA/802.1x Only - Accepts only WPA clients and the
encryption key is obtained dynamically from RADIUS server
with 802.1X protocol.
WPA2/802.1x Only - Accepts only WPA2 clients and the
encryption key is obtained dynamically from RADIUS server
with 802.1X protocol.
Mixed (WPA+WPA2/802.1x only) - Accepts WPA and WPA2
clients simultaneously and the encryption key is obtained
dynamically from RADIUS server with 802.1X protocol.
WPA/PSK - Accepts only WPA clients and the encryption key
should be entered in PSK.
WPA2/PSK - Accepts only WPA2 clients and the encryption
key should be entered in PSK.
Mixed (WPA+ WPA2)/PSK - Accepts WPA and WPA2 clients
simultaneously and the encryption key should be entered in
PSK.
The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated via
802.1x authentication. Either 8~63 ASCII characters, such as
012345678(or 64 Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
Pre-Shared Key (PSK) - Either 8~63 ASCII characters, such as
012345678..(or 64 Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
Password Strength – The system will display the password
strength (represented with the word of weak, medium or
strong) of the PSK specified above.
64-Bit - For 64 bits WEP key, either 5 ASCII characters, such
as 12345 (or 10 hexadecimal digitals leading by 0x, such as
0x4142434445.)
Vigor2620 Series User's Guide