Draytek Vigor2620 LTE Series User Manual page 36

Item
Protocol
For ADSL Only
Fixed IP
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
VLAN Tag insertion
(VDSL2)/(ADSL)
Back
Next
Cancel
2. After finished the above settings, simply click Next. Manually enter the
Username/Password provided by your ISP
24
Description
There are two modes offered for you to choose for WAN1
interface.
Choose PPPoE/PPPoA as the protocol.
Such field is provided for ADSL only. You have to choose
encapsulation and Enter the values for VPI and VCI. Or, click
Auto detect to find out the best values.
Click Yes to enable Fixed IP feature.
Enter the IP address if Fixed IP is enabled.
Enter the subnet mask.
Enter the IP address as the default gateway.
Enter the primary IP address for the router.
Enter secondary IP address for necessity in the future.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please Enter the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Enter the value as the VLAN ID number. The
range is from 0 to 4095.
Priority – Enter the packet priority number for such VLAN.
The range is from 0 to 7.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
Vigor2620 Series User's Guide