Draytek Vigor2620 LTE Series User Manual page 471

-d
<prefix> <prefix-length>
-a
<LAN1/LAN2/WAN1/WAN2/
USB1/USB2/VPN1~VPN32>
-l
E x a m p l
E x a m p
> ip6 route -s FE80::250:7FFF:FE12:500 16 FE80::250:7FFF:FE12:100 LAN1
%
> ip6 route -a LAN1
PREFIX/PREFIX-LEN
-------------------------------------------------------------------------
::0.0.0.1/128
FE80::/128
FE80::21D:AAFF:FE00:0/128
FE80::/64
FE80::/16
FF00::/8
T e l n e t C o m m
T e l n e t C o m m
This command allows you to pin an IPv6 address or a host.
S y n t a x
S y n t a x
ip6 ping <IPv6 address/Host> <LAN1/LAN2/WAN1/WAN2/USB1/USB2> <send count>
<data_size>
S y n t a x
S y n t a x
Parameter
<IPV6 address/Host>
<LAN1/LAN2/WAN1/WAN
2/USB1/USB2>
<send count>
<data_size>
E x a m p l
E x a m p
> ip6 ping 2001:4860:4860::8888 WAN1
Pinging 2001:4860:4860::8888 with 64 bytes of Data:
Receive reply from 2001:4860:4860::8888, time=330ms
Receive reply from 2001:4860:4860::8888, time=330ms
Receive reply from 2001:4860:4860::8888, time=330ms
Vigor2620 Series User's Guide
e
l e
Route FE80::250:7FFF:FE12:500/16 successfully added!
a n d : i p 6 p i n g
a n d : i p 6 p i n g
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to specify the IPv6 address or host for ping.
It means to specify LAN or WAN interface for such address.
It means to set the request number of ping. Default number
is 5.
It means to set the data size (1 to 1452).
<data_size>: Enter a value.
e
l e
default route.
It means to delete a route.
<prefix>: It means to enter the prefix number of IPv6
address.
<prefix length>: It means to enter a fixed value as the
length of the prefix.
It means to show the route status.
<LAN1/LAN2/WAN1/WAN2/ USB1/USB2/VPN1~VPN32>
to specify LAN or WAN or VPN interface for such address.
It means to clear the routing table.
I/F METRIC FLAG NEXT-HOP
LAN1 0 U ::
LAN1 0 U ::
LAN1 0 U ::
LAN1 256 U ::
LAN1 1024 UGS
FE80::250:7FFF:FE12:100
LAN1 256 U ::
: It means
459