Draytek Vigor2620 LTE Series User Manual page 496

T e l n e t C o m m
T e l n e t C o m m
This command is used to create an IP object profile.
S y n t a x
S y n t a x
object ip obj setdefault
object ip obj INDEX -v
object ip obj INDEX -n NAME
object ip obj INDEX -i INTERFACE
object ip obj INDEX -s INVERT
object ip obj INDEX -a TYPE <START_IP><END/MASK_IP>
S y n t a x
S y n t a x
Parameter
setdefault
INDEX -v
INDEX -n NAME
INDEX -i INTERFACE
INDEX -s INVERT
INDEX -a TYPE <START_IP>
<END/MASK_IP>
484
a n d : o b j e c t i p o b
a n d : o b j e c t i p o b
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to return to default settings for all profiles.
It means to view the information of the specified object
profile.
INDEX: Enter the index number of the specified group
profile.
Example: object ip obj 1 -v
It means to define a name for the IP object.
INDEX: Enter the index number of the specified group
profile.
NAME: Enter a name with less than 15 characters.
Example: object ip obj 9 -n bruce
It means to define an interface for the IP object.
INDEX: Enter the index number of the specified group
profile.
INTERFACE: Enter 0, 1, 3
0, means any
1, means LAN
3, means WAN
Example: object ip obj 8 -i 0
It means to set invert seletion for the object profile.
INDEX: Enter the index number of the specified group
profile.
INVERT: Enter 0, 1
0, means disableing the function.
1, means enabling the function.
Example: object ip obj 3 -s 1
It means to set the address type and IP for the IP object
profile.
INDEX: Enter the index number of the specified group
profile.
TYPE: Enter 0, 1, 2, 3 or 4
0, means Mask
1, means Single
2, means Any
3, means Rang
4, means Mac
Example: object ip obj 3 -a 2
<START_IP>: When the TYPE is set with 2, you have to type
an IP address as a starting point and another IP address as
end point.
<END/MASK_IP>: Enter an IP address (different with
j
j
Vigor2620 Series User's Guide