Draytek Vigor2620 LTE Series User Manual page 210

Password
Pre-Shared Key
Confirm Pre-Shared
Key
Digital Signature
(X.509)
Peer IP/VPN Client IP
Peer ID
Remote Network IP
Remote Network
Mask
Local Network IP
Local Network Mask
3. After finishing the configuration, please click Next. The confirmation page will be
shown as follows. If there is no problem, you can click one of the radio buttons listed on
the page and click Finish to execute the next action.
Available settings are explained as follows:
198
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPsec policy above.
The length of the name is limited to 11 characters.
For IPsec/L2TP IPsec authentication, you have to type a
pre-shared key.
The length of the name is limited to 64 characters.
Enter the pre-shared key again for confirmation.
Check the box of Digital Signature to invoke this function.
Peer ID – Choose the peer ID selection from the drop down
list.
Local ID – Choose Alternative Subject Name First or Subject
Name First.
Enter the WAN IP address or VPN client IP address for the
remote client.
Enter the ID name for the remote client.
The length of the name is limited to 47 characters.
Please type one LAN IP address (according to the real
location of the remote host) for building VPN connection.
Please Enter the network mask (according to the real
location of the remote host) for building VPN connection.
Enter the local network IP for TCP / IP configuration.
Enter the local network mask for TCP / IP configuration.
Vigor2620 Series User's Guide