Draytek Vigor2620 LTE Series User Manual page 128

Available settings are explained as follows:
Item
Customized List
Enable
Interface
Next Server IP
Address/SIAddr
Option Number
DataType
Data
To add a DHCP option entry from scratch, clear the data entry fields (Enable, Interface,
Option Number, DataType and Data) by clicking Reset. After filling in the values, click Add
to create the new entry.
To add a DHCP option entry modeled after an existing entry, click the model entry in
Customized List. The data entry fields will be populated with values from the model entry.
After making all necessary changes for the new entry, click Add to create it.
To modify an existing DHCP option entry, click on it in Customized List. The data entry fields
will be populated with the current values from the entry. After making all necessary changes,
click Update to save the changes.
To delete a DHCP option entry, click on it in Customized List, and then click Delete.
116
Description
Shows all the DHCP options that have been configured in the
system.
If selected, DHCP option entry is enabled.
If unselected, DHCP option entry is disabled.
LAN interface(s) to which this entry is applicable.
Overrides the DHCP Next Server IP address (DHCP Option 66)
supplied by the DHCP server.
DHCP option number (e.g., 100).
Type of data in the Data field:
ASCII Character - A text string. Example: /path.
Hexadecimal Digit - A hexadecimal string. Valid characters
are from 0 to 9 and from a to f. Example: 2f70617468.
Address List - One or more IPv4 addresses, delimited by
commas.
Data of this DHCP option.
Vigor2620 Series User's Guide