Draytek Vigor2620 LTE Series User Manual page 468

-z <value>
-x <hostname/ IPv6 addr>
-i <value>
-b <0/1>
-R <0/1>
E x a m p l
E x a m p
> ip6 internet -W 2 -M 2 -u 88886666 -p draytek123456 –s amsterdam.freenet6.net
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
> system reboot
456
0:NS Detect
1:Ping Detect
2:Always On
It means to set Ping Detect TTL (0-255).
<value>: Enter 0~255.
It means to set Ping Detect Host (hostname or IPv6 address).
<hostname/ipv6 addr> : Enter a hostname or an IPv6
address.
It means to set ipv6 connection interval.
<value>: Enter a number (1500-60000 (unit:10ms)).
It means to enable DNSv6 based on DHCPv6.
1 = on
0 = off
It means to Enable RIPng.
1 = on
0 = off
e
l e
Vigor2620 Series User's Guide