Vigor2620Ln,
Vigor2620Lne,
Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
DSL
SIM2/SIM1
(Vigor2620Ln)
SIM1
(Vigor2620Lne)
P2-P1
ON/OFF
PWR
Vigor2620 Series User's Guide
Description
Press the button and release it within 2 seconds. When the wireless
function is ready, the green LED will be on.
Press the button and release it within 2 seconds to turn off the
WLAN function. When the wireless function is not ready, the LED
will be off.
When WPS function is enabled by web user interface, press this
button for more than 2 seconds to wait for client's device making
network connection through WPS.
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
Connecter for accessing the Internet.
SIM card slot(s).
SIM card slot(s).
Connecters for local network devices.
Power Switch.
Connecter for a power adapter.
5