Draytek Vigor2620 LTE Series User Manual page 191

Available settings are explained as follows:
Item
Mode
Security
Pre-shared Key
Bridge
Vigor2620 Series User's Guide
Description
Choose the mode for WDS setting. Disable mode will not
invoke any WDS setting. Repeater mode is for the second
one.
There are three types for security, Disable, WEP and
Pre-shared key. The setting you choose here will make the
following WEP or Pre-shared key field valid or not. Choose
one of the types for the router.
When Pre-Shared Key is selected as Security above,
configure the following settings if required.
Type – There are some types for you to choose. WPA and
WPA2 are used for WDS devices (e.g.2925n wireless router,
you can set the encryption mode as WPA or WPA2 to establish
your WDS system between AP and the router.
Key – Set the encryption key in this field. Type 8 ~ 63 ASCII
characters or 64 hexadecimal digits leading by "0x".
If you choose Bridge as the connecting mode, please Enter
the peer MAC address in these fields. Four peer MAC
addresses are allowed to be entered in this page at one time.
Yet please disable the unused link to get better
179