pin_secret<pin> <secret>
<list index> timeout
<0~9999>
<list index> dintype
<Type> <on/off>
<list index> subnet <0~2>
<list index> assignip
<on/off>
<list index> srnode
<on/off>
<list index>remoteip
<Remote_Client_IP_Addr
ess>
<list index> peer
<Peer_ID>
<list index>naming
<pass/block>
Vigor2620 Series User's Guide
<list index>: Enter the index number of L2L (LAN to LAN)
profile.
<pin>: Enter the code for authentication (e.g, 1234).
<secret>: Use the 32 digit-secret number generated by mOTP
in the mobile phone (e.g., e759bb6f0e94c7ab4fe6)
It means to set the time out for dial-in VPN profile.
<list index>: Enter the index number of L2L (LAN to LAN)
profile.
<0~9999>: Enter a number. The default is 300 seconds.
It means to set dial-in type for creating VPN connection.
<list index>: Enter the index number of L2L (LAN to LAN)
profile.
<Type>: 0:PPTP,1:IPsec Tunnel,2:L2TP with IPsec Policy,3:SSL
Tunnel
<on/off>: Enter on or off.
On, Enable.
Off, Disable.
It means to set the LAN subnet for the VPN profile.
<list index>: Enter the index number of L2L (LAN to LAN)
profile.
<0~2>: Enter 0, 1 or 2.
0:LAN1
1:LAN2
2:LAN3
It means to enable the assignment for static IP address.
<list index>: Enter the index number of L2L (LAN to LAN)
profile.
<on/off>: Enter on or off.
On, Enable.
Off, Disable.
It means to enable the function of Specify Remote Node.
<list index>: Enter the index number of L2L (LAN to LAN)
profile.
<on/off>: Enter on or off.
On, Enable.
Off, Disable.
It means to assign the IP address for the remote client.
<list index>: Enter the index number of L2L (LAN to LAN)
profile.
<Remote_Client_IP_Address>: Enter the IP address.
It means to assign the peer ID for such profile.
<list index>: Enter the index number of L2L (LAN to LAN)
profile.
<Peer_ID>: Enter the peer ID.
<list index>: Enter the index number of L2L (LAN to LAN)
profile.
<pass/block>: Enter pass or block.
Pass, have an inquiry for data transmission between the hosts
located on both sides of VPN Tunnel while connecting.
553