Draytek Vigor2620 LTE Series User Manual page 476

S y n t a x
S y n t a x
Parameter
–h
-v
-p <0/1>
E x a m p l
E x a m p
> ip6 ntp -p 1
% Set NTP Priority: IPv6 First
T e l n e t C o m m
T e l n e t C o m m
This command allows you to set IPv6 settings for LAN interface.
S y n t a x
S y n t a x
ip6 lan -l n <-<l:w:d:D:m:o:s> <parameter> / ... >
S y n t a x
S y n t a x
Parameter
–h
-l <n>
-w <n>
-d <server>
-D <server>
-m <n>
-o <n>
-e <n>
-E <n>
-b <map>
-f <n>
-R <n>
-s <n>
464
D e s c r i p t i o n
D e s c r i p t i o n
Description
It is used to display the usage of such command.
It is used to show the NTP state.
It is used to specify NTP server for IPv6.
0 – Auto
1 – First Query IPv6 NTP Server.
e
l e
a n d : i p 6 l a n
a n d : i p 6 l a n
D e s c r i p t i o n
D e s c r i p t i o n
Description
It is used to display the usage of such command.
It means to selete LAN interface to be set.
n= 1: LAN1
n= 2: LAN2, ... x: LANx. Default is LAN1
It means to selete WAN interface to be primary interface.
n= 0: None,
n=1: WAN1 ,
n=2: WAN2, ... x: WANx.
It means to set 1st DNS Server IP.
<server>: Enter the IPv6 Address.
It means to set 2nd DNS Server IP.
<server>: Enter the IPv6 Address.
It means to set ipv6 LAN management.
n=0:OFF
n=1:SLAAC. Default is SLAAC
n=2:DHCPv6
It means to enable Other option(O-bit) flag. (O-bit is
redundant when management is DHCPv6)
n=0: Disable
n=1: Enable.
It means to add an extension WAN.
n: 1: WAN1, 2: WAN2, ... x: WANx.
It means to delete an extension WAN.
n: 1: WAN1 ,2: WAN2, ... x: WANx.
It means to set bit map(decimal) for extension WAN.
<map>: 0: WAN1; 1: WAN2, ... n: WAN(n+1).
It means to disable IPv6.
n=1: Disable IPv6,
n=0: Enable IPv6.
It means to enable /disable RIPng.
n=1: Enable RIPng,
n=0: Disable RIPng.
It means to show IPv6 LAN setting.
n=0:show all. Default is show all.
Vigor2620 Series User's Guide