Draytek Vigor2620 LTE Series User Manual page 416

encap=LLC(1)
proto=PPPoE(1)
modu=MULTI(4)
AcquireIP: Dhcp_client(1)
Idle timeout:-1
Username=draytek
Password=draytek
T e l n e t C o m m
T e l n e t C o m m
This command can specify a LAN port (LAN1 to LAN4) for mapping to certain PVC, and the
mapping port/PVC will be operated in bridge mode.
S y n t a x
S y n t a x
adsl bridge <pvc_no/status/save/enable/disable> <on/off/clear/tag tag_no><service type>
<px ... >
S y n t a x
S y n t a x
Parameter
<pvc_no>
<status>
<save>
<enable>
<disable>
<on/off>
<clear>
<tag tag_no>
<pri pri_no>
<service type>
<px...>
E x a m p l
E x a m p
> adsl bridge 4 on p2 p3
PVC Bridge
------------------------------------------------------------
4
404
a n d : a d s l b r i d g e
a n d : a d s l b r i d g e
D e s c r i p t i o n
D e s c r i p t i o n
e
l e
p1 p2 p3
ON 0 0 1
Description
It means pvc number and must be between 0(Channel 1) to
7(Channel 8).
pvc_no=0~7
It means to shown the whole bridge status.
It means to save the configuration to flash.
It means to enable the Multi-VLAN function.
It means to disable the Multi-VLAN function.
It means to turn on/off bridge mode for the specific
channel.
It means to turn off and clear all the PVC settings.
It means to set tag number.
tag_no= 0-4095, -1 means no tag.
The number 0 to 7 can be set to indicate the priority. "7" is
the highest.
pri_no= 0~7
Two number can be set:
service type=0: for Normal (all the applications will be
processed with the same PVC).
service type=1: for the IGMP with different PVC which is
used for special ISP.
It means the number of LAN port (x=2~4). Port 1 is locked for NAT.
px=2~4
p4 Service Type
0 Normal -1(OFF)
Tag Pri
0
Vigor2620 Series User's Guide