Draytek Vigor2620 LTE Series User Manual page 516

<command>
<parameter>/...
-h
-c <no>
-n <name>
-a <no>
-e <no>
-d <no>
-m <mode>
-l <addr>
-r <addr>
-p <DSCP id>
-s <Service type>
-S <d/s>
-V <1/2/3>
[...]
E x a m p l
E x a m p
504
The available commands with parameters are listed below.
<...> means that you can Enter several commands in one line.
Type it to display the usage of this command.
Specify the inde number for the class.
<no>: Enter 1, 2 or 3. The default setting is class 1.
It means to type a name for the class.
<name>: Enter a name.
It means to add rule for specified class.
<no>: Enter the index number for the rule.
It means to edit specified rule.
<no>: Enter the index number for the rule.
It means to delete specified rule.
<no>: Enter the index number for the rule.
It means to enable or disable the specified rule.
<mode>: Enter 0 or 1.
0: disable,
1: enable
Set the local address.
<addr>: Enter <Addr1>, <addr1:addr2>, <addr1:subnet> or
any.
<Addr1> – It means Single address. Please specify the IP
address directly, for example, "-l 172.16.3.9".
<addr1:addr2> – It means Range address. Please specify the
IP addresses, for example, "-l 172.16.3.9: 172.16.3.50."
<addr1:subnet> – It means the subnet address with start IP
address. Please Enter the subnet and the IP address, for
example, "-l 172.16.3.9:255.255.0.0".0
<any> – It means Any address. Simple type "-l" to specify any
address for this command.
Set the remote address.
<addr>: Enter <Addr1>, <addr1:addr2>, <addr1:subnet> or
any.
<Addr1> – It means Single address. Please specify the IP
address directly, for example, "-l 172.16.3.9".
<addr1:addr2> – It means Range address. Please specify the
IP addresses, for example, "-l 172.16.3.9: 172.16.3.50."
<addr1:subnet> – It means the subnet address with start IP
address. Please Enter the subnet and the IP address, for
example, "-l 172.16.3.9:255.255.0.0".0
<any> – It means Any address. Simple type "-l" to specify any
address for this command.
Specify the ID.
<DSCP id>: Enter the ID.
Specify the service type by typing the number.
<Service type>: Enter 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 or
30.
1:ANY 2:DNS 3:FTP 4:GRE 5:H.323
6:HTTP 7:HTTPS 8:IKE 9:IPSEC-AH 10:IPSEC-ESP
11:IRC 12:L2TP 13:NEWS 14:NFS 15:NNTP
16:PING 17:POP3 18:PPTP 19:REAL-AUDIO 20:RTSP
21:SFTP 22:SIP 23:SMTP 24:SNMP 25:SNMP-TRAPS
26:SQL-NET 27:SSH 28:SYSLOG 29:TELNET 30:TFTP
Show the content for specified DSCP ID/Service type.
<d/s>: Enter d or s.
Show the rule in the specified class.
<1/2/3>: Enter 1, 2 or 3.
It means that you can Enter several commands in one line.
e
l e
Vigor2620 Series User's Guide