Draytek Vigor2620 LTE Series User Manual page 77

Item
Enable/Disable
ADSL Modem Settings
IP Network Settings
Vigor2620 Series User's Guide
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Set up the DSL parameters required by your ISP. These
settings configured here are specified for ADSL only.
Multi-PVC channel - The selections displayed here are
determined by the page of Internet Access >>Multi PVCs.
Select M-PVCs Channel means no selection will be chosen.
Encapsulation - Drop down the list to choose the type
provided by ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Modulation –Default setting is Multimode. Choose the one
that fits the requirement of your router.
This group allows you to obtain an IP address automatically
and allows you type in IP address manually.
Obtain an IP address automatically – Click this button to
obtain the IP address automatically.
More Options - Click it to display router name and domain
name items.

Router Name – Type in the router name provided by
ISP.

Domain Name – Type in the domain name that you have
assigned.

DHCP Client Identifier - Check the box to specify
username and password as the DHCP client identifier
for some ISP.

Username: Type a name as username. The
maximum length of the user name you can set is
63 characters.

Password: Type a password. The maximum length
of the password you can set is 62 characters.
Specify an IP address – Click this radio button to specify
some data.

IP Address – Type in the private IP address.

Subnet Mask – Type in the subnet mask.

Gateway IP Address – Type in gateway IP address.

WAN IP Alias - If you have multiple public IP addresses
and would like to utilize them on the WAN interface,
please use WAN IP Alias. You can set up to 8 public IP
addresses other than the current one you are using.
Notice that this setting is available for WAN1 only. Type
the additional WAN IP address and check the Enable
box. Then click OK to exit the dialog.
65