Draytek Vigor2620 LTE Series User Manual page 510

> object mail obj 1 -n buyer
> object mail obj 1 -s 192.168.1.98
> object mail obj 1 -m 25
> object mail obj 1 -t 1
> object mail obj 1 -u john
> object mail obj 1 -p happy123456
> object mail obj 1 -i 25
> object mail obj 1 -v
Profile Index: 1
Profile Name:[buyer]
SMTP Server:[192.168.1.98]
SMTP Port:[25]
Sender Address:[]
Use SSL:[disable]
Authentication:[enable]
Username:[john]
Password:[******]
Sending Interval:[25(seconds)]
>
T e l n e t C o m m
T e l n e t C o m m
This command is used to create notification object profile.
S y n t a x
S y n t a x
object noti show
object noti setdefault
object noti obj INDEX -v
object noti obj INDEX -n Profile Name
object mail obj INDEX –e Category Status
object mail obj INDEX –d Category Status
S y n t a x
S y n t a x
Parameter
show
setdefault
INDEX -v
INDEX -n Profile Name
INDEX–e Category Status
498
a n d : o b j e c t n o t i
a n d : o b j e c t n o t i
D e s c r i p t i o n
D e s c r i p t i o n
Description
It means to show the contents for all of the profiles.
It means to return to default settings for all profiles.
It means to view the information of the specified notification
object profile.
INDEX: Enter the index number (from 1 to 8) of the specified
notification object profile.
It means to define a name for the notification object profile.
INDEX: Enter the index number (from 1 to 8) of the specified
notification object profile.
Profile Name: Type a name with less than 15 characters.
It means to enable the status of specified category.
INDEX: Enter the index number (from 1 to 8) of the specified
notification object profile.
Category: Enter 1, 2, 3, 4 or 5.
1: WAN; 2: VPN Tunnel; 3: Temperature Alert;
4: WAN Budget; 5: CVM
Status: Enter 1, 2, 3, 4, or 5
For WAN –
For VPN Tunnel -
For Temperature Alert –
1: Disconnected; 2: Reconnected.
1: Disconnected; 2: Reconnected.
Vigor2620 Series User's Guide