Draytek Vigor2620 LTE Series User Manual page 590

<mode><key><index>
ratectl
<ssid_num><enable>
<upload download>
Isolate <ssid_num> <lan
member>
dtim <value>
beaconperiod <value>
radio <enable>
frag <value>
rts <value>
rate_alg <value>
578
connection.
<SSID_NUMBER>: Enter 1, 2, 3 or 4 to specify SSID1, SSID2,
SSID3 or SSID4.
<mode>: Available settings are:
disable: No security.
wpa1x: WPA/802.1x Only
wpa21x: WPA2/802.1x Only
wpamix1x: Mixed (WPA+WPA2/802.1x only)
wep1x: WEP/802.1x Only
wpapsk: WPA/PSK
wpa2psk: WPA2/PSK
wpamixpsk: Mixed (WPA+WPA2)/PSK
wep: WEP
<key>: Enter a string. You have to add keys for wpapsk,
wpa2psk, wpamixpsk and wep, and specify index number of
schedule profiles to be followed by the wireless connection.
WEP keys must be in 5/13 ASCII text string or 10/26
Hexadecimal digit format; WPA keys must be in 8~63 ASCII
text string or 64 Hexadecimal digit format.
<index>: Enter an index number.
It means to set the rate control for the specified SSID.
<ssid_num>: Enter 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3
or SSID4.
<enable>: Enter 0 or 1. It means to enable the function of the
rate control for the specified SSID. 0: disable and 1:enable.
<upload>: Enter a value. It means to configure the rate
control for data upload. The unit is kbps.
<download>: Enter a value. It means to configure the rate
control for data download. The unit is kbps.
It means to isolate the wireless connection for LAN and/or
Member.
<ssid_num>: Enter 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3
or SSID4.
<lan> – It can make the wireless clients (stations) with
remote-dial and LAN to LAN users not accessing for each
other. Enter 1 to enable, or 0 to disable.
<member> – It can make the wireless clients (stations) with
the same SSID not accessing for each other. Enter 1 to
enable, or 0 to disable.
<value>: Enter a number (1 ~255) to set DTIM.
<value>: Enter a number (20 ~1023, unit in milli-seonds) as
beacon period.
<enable>: Enter 1 or 0 to enable or disable the wireless
radio.
<value>: Enter a number (256 ~2346) to set fragment
threshold.
<value>: Enter a number (1 ~2347) to set RTS threshold.
<value>: Enter 0, or 1 to set the version of rate algorithm.
0, old algorithm
1, new algorithm
Vigor2620 Series User's Guide