Draytek Vigor2620 LTE Series User Manual page 184

Hide SSID
SSID
Isolate
Rate Control
Schedule Profiles
After finishing all the settings here, please click OK to save the configuration.
172
Check it to prevent from wireless sniffing and make it harder
for unauthorized clients or STAs to join your wireless LAN.
Depending on the wireless utility, the user may only see the
information except SSID or just cannot see any thing about
Vigor wireless router while site surveying. The system allows
you to set four sets of SSID for different usage. In default,
the first set of SSID will be enabled. You can hide it for your
necessity.
Means the identification of the wireless LAN. SSID can be any
text numbers or various special characters.
Member –Check this box to make the wireless clients
(stations) with the same SSID not accessing for each other.
VPN – Check this box to make the wireless clients (stations)
with different VPN not accessing for each other.
Enable – Check the box to set the rate limit for data
transmission in upload and download.
It controls the data transmission rate through wireless
connection.
Upload – Check Enable and enter the transmitting rate for
data upload. Default value is 30,000 kbps.
Download – Enter the transmitting rate for data download.
Default value is 30,000 kbps.
Set the wireless LAN to work at certain time interval only.
You may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this field is blank and the function will always
work.
Vigor2620 Series User's Guide