Agilent Technologies InfinityLab LC Series User Manual page 96

4
Installation of the Optional Sample Cooler or Thermostat
Install the Sample Cooler or Thermostat
11
C AU T I O N
Damage to the sample cooler or thermostat
➔
Wait at least 30 min before switching on the module.
➔
This allows the refrigerant and system lubrication to
reach equilibrium.
13
Connect the power cable to the power connector at the
rear of the module.
96
12
N O T E
Check leak waste handling for further info.
14
Configure the Sample Cooler or Thermostat in the CDS.
Agilent InfinityLab LC Series Vialsamplers User Manual