2
Site Requirements and Specifications
Specifications of the Sample Thermostat
General hazards and improper disposal
C AU T I O N
Improper disposal of the media and components used pollutes the environment.
➔
➔
➔
Table 8
Type
Operating principle
Temperature range
Temperature settable
Temperature
accuracy
(<25 °C, <50 % r.H.)
Minimum firmware revision for the sample thermostat is D.07.22.
N O T E
Minimum LC driver revision for the sample thermostat is A.02.14.
50
The breakdown of the sample cooler or sample thermostat unit must be carried out
by specialist refrigeration company.
All media must be disposed of in accordance with national and local regulations.
Please contact your local Agilent Service Center in regard to safe environmental
disposal of the appliance or check
Performance Specifications for the Sample Thermostat
Specifications
High performance, low-energy consumption
micro-compressor based cooler with natural R600a coolant (Butane 30 g),
user-upgradable
from 4 – 40 °C
from 4 – 40 °C in 1 ° increments
2 – 6 °C at a setpoint of 4 °C
www.agilent.com
Agilent InfinityLab LC Series Vialsamplers User Manual
for more info.