3
Using the Module
Install the Integrated Column Compartment
11
Turn the column onto the Quick Connect Fitting until it is
fingertight.
13
Connect and install the fitting fingertight.
15
Position the column into the Column Holder Clip(s).
64
12
Close the lever to make a pressure tight connection.
14
Use a wrench to counter the column while tightening the
capillary fitting.
16
Route the capillary leading to the system between the
latch and the Integrated Column Compartment.
N O T E
Optionally route the capillary to the side.
Agilent InfinityLab LC Series Vialsamplers User Manual