Transporting the sampler with a sample cooler or sample thermostat installed is only
N O T E
allowed for short distances. For longer distances, you must separate the units and send
them independently.
Mechanical damage of the module
C AU T I O N
If the transport assembly is not parked and not protected by the transport foam, the
module could be damaged due to excessive shock of the shipping container during
transport.
➔
➔
➔
If the sampler with a sample cooler or sample thermostat needs to be shipped
to another location via carrier, ensure:
• The two modules are shipped in separate boxes.
• The gripper arm of the sampler is parked, see Park Arm in Agilent Lab
• Install the transport protection.
• Remove all vials from the drawers.
• The condensed water inside of the sample cooler or sample thermostat is
Agilent InfinityLab LC Series Vialsamplers User Manual
Transporting the Sampler with a Sample Cooler or Sample Thermostat Installed
Always park the transport assembly before shipment.
Protect the instrument by Transport-Protection (G7129-40050)
Store the installation foam in a save place, to use it for later transport of the
module.
Advisor online help for more information. Also ensure there is no vial in the
gripper arm.
removed.
3
Using the Module
85