Agilent Technologies InfinityLab LC Series User Manual page 270

12
Hardware Information
Interfaces
Table 19 Agilent InfinityLab LC Series Interfaces
Module
Fraction Collectors
G7159B
G7166A
G1364E/F, G5664B
Others
G7116A/B
G7122A
G7170B
The detector (DAD/MWD/FLD/VWD/RID) is the preferred access point for control via
N O T E
LAN. The inter-module communication is done via CAN.
• CAN connectors as interface to other modules
• LAN connector as interface to the control software
• RS-232C as interface to a computer
• USB (Universal Series Bus) as interface to a computer
• REMOTE connector as interface to other Agilent products
• Analog output connector(s) for signal output
270
CAN USB LAN
(on-board)
2 Yes Yes
2 No No
2 Yes Yes
2 No No
No No No
2 No No
RS-232 Analog APG (A)
No No
No No
No No
No No
Yes No
No No
Agilent InfinityLab LC Series Vialsamplers User Manual
Special
/ ERI (E)
E
No Requires a host module
with on-board LAN with
minimum FW B.06.40 or
C.06.40, or with
additional G1369C LAN
Card
E THERMOSTAT for
G1330B
No Requires a HOST
module via CAN
A
No Requires a host module
with on-board LAN with
minimum FW B.06.40 or
C.06.40, or with
additional G1369C LAN
Card